MAURER's tuned mass damper line serves structures with low inherent damping, where wind or earthquake loads drive substantial vibration amplitudes in high-rise buildings, towers, and chimney stacks. Each unit is custom-designed for its host, with a spring calibrated to the structure's natural frequency and mass sized to the relevant modal mass.
Passive variants include vertical (MTMD-V), horizontal (MTMD-H), and pendulum (MTMD-P) types, plus an adaptive TMD whose real-time regulation improves vibration reduction by 60 to 80 percent while cutting required mass to 75 to 85 percent of nominal. Services cover measurement, planning, simulation, installation, testing, and monitoring of frequency and mass displacement.

Maurer tuned mass dampers are custom spring-mass systems that cut wind-induced vibration in high-rise buildings.


DEICON builds active tuned mass dampers and active mass dampers for structures that cannot carry a large passive unit.


DEICON's semi-active air-suspended tuned mass damper re-tunes its stiffness and damping in software with no hardware change.


The Hummingbird is a compact fluid harmonic damper that suppresses wind-induced sway in tall buildings.


mageba Tuned mass dampers are tuned to frequencies 1.3 to 10 Hz to damp vibration on bridges and floor structures.


GERB tuned mass dampers are passive damping systems for wide-span, tall, and slender wind-oscillated structures.


DEICON tuned mass dampers are passive, semi-active, and active systems that quiet structural resonant vibration.
DEICON builds active tuned mass dampers and active mass dampers for structures that cannot carry a large passive unit.

DEICON's semi-active air-suspended tuned mass damper re-tunes its stiffness and damping in software with no hardware change.

The Hummingbird is a compact fluid harmonic damper that suppresses wind-induced sway in tall buildings.

mageba Tuned mass dampers are tuned to frequencies 1.3 to 10 Hz to damp vibration on bridges and floor structures.

GERB tuned mass dampers are passive damping systems for wide-span, tall, and slender wind-oscillated structures.

DEICON tuned mass dampers are passive, semi-active, and active systems that quiet structural resonant vibration.



CALMFLOOR is an active mass damping system that controls floor vibration in buildings.


The YACMO AMD is an active mass damper device for reducing horizontal vibration in buildings.


Electro-Pro is ISAAC's active mass damper system for reducing earthquake-induced vibration in existing buildings.
CALMFLOOR is an active mass damping system that controls floor vibration in buildings.

The YACMO AMD is an active mass damper device for reducing horizontal vibration in buildings.

Electro-Pro is ISAAC's active mass damper system for reducing earthquake-induced vibration in existing buildings.
